Description
The TA485-14 records holder provides protected storage for rolled documents, tools and support items in shipping or storage containers. Its minimum internal length is 14 in (356 mm), with a 3.3 in (83.8 mm) minimum internal diameter.
The holder is waterproof and pressure-tight up to 5 psig. A retained gasket seals it to the container, and an O-ring seals the spring-loaded cover. Press and turn the cover approximately 60 degrees to close it. Holes in the cover and flange allow safety wire or an inspector’s seal to be fitted.
Install through a 4.015 in (102 mm) diameter hole on a smooth, flat surface. A gasket, washer and mounting nut are supplied; a blind threaded insert at the end of the tube provides additional support. Rough, curved or domed surfaces may prevent a tight seal.
The aluminium alloy body has a conversion coating to MIL-DTL-5541, the stainless-steel cover is passivated, and the O-ring and gasket are Buna-N. Tighten the spanner nut to 150 in-lb (17 N·m).
Dimensions:
- Overall length: 14.75 in (375 mm)
- Maximum width: 5 in (127 mm)
- Maximum height (cover diameter): 4.52 in (114.8 mm)
- Length behind the mounting flange: 13.75 in (349 mm)
- Minimum internal length: 14 in (356 mm)
Further information
| Weight | 0.908 kg |
|---|---|
| Body Material | Aluminium alloys, conversion coated to MIL-DTL-5541 standards |
| Cover Material | Stainless steel, passivated |
| Seals | Buna-N o-ring and gasket |
| Spanner Nut Torque | 150 in-lbs (17 Nm) |
| Mounting Hole Diameter | 4.015" (102 mm) diameter hole |
| Rated Pressure | Up to 5 psig |
Drawings available on request.
Request drawings
